MHL Machinery Sdn Bhd
11-1, Jalan Medan Putra 1 (1/62D),
Medan Putra Business Centre,
Bandar Sri Manjalara,
52200 Kuala Lumpur,
Malaysia.
11-1, Jalan Medan Putra 1 (1/62D),
Medan Putra Business Centre,
Bandar Sri Manjalara,
52200 Kuala Lumpur,
Malaysia.
+603-6276 6266
+603-6277 4454
+603-6277 4454
+603-6275 6045
+603-6277 0360
+603-6277 0360
Nants 22S
|
Nants 22S |
Specification
Features
* The machine is made of stainless steel 304 and easy to clean.
* The motion wheel is made of stainless steel 304.
* The motion wheel is directily connected, and the motor is with a power-cutting break.
* Tension-control device is applied in cutting-band to make adjustment easier and facilitate the installation.
* The design of cutting-band raised on both sides is to prevent the middle of the table will be divided into five sparate pieces when treated by the machine.
* Using four sets of motion wheels; meat placed in the middle of the table will be divided into five separate pieces when treated by the machine.
* It has the certification of CE.
* It can be tailor-made to be either manual or fully automatic.
Dimensions | 245(W) x 575(D) x 440(H)440mm |
Weight | 32kg |
Power supply | 3P 200V 60Hz/50Hz |
Motor | 0.75kW |
Capacity | 260kg/h(Plate mesh3.2mm) |
Features
* The machine is made of stainless steel 304 and easy to clean.
* The motion wheel is made of stainless steel 304.
* The motion wheel is directily connected, and the motor is with a power-cutting break.
* Tension-control device is applied in cutting-band to make adjustment easier and facilitate the installation.
* The design of cutting-band raised on both sides is to prevent the middle of the table will be divided into five sparate pieces when treated by the machine.
* Using four sets of motion wheels; meat placed in the middle of the table will be divided into five separate pieces when treated by the machine.
* It has the certification of CE.
* It can be tailor-made to be either manual or fully automatic.